Self Tuning Adptive Pole-Shift STATCOM Control for Single and Multi
Machine Power Systems
A.H.M.A.Rahim1
and M. Baber Abbas2
1Department
of Electrical Engineering, King Fahd University of Petroleum &
Minerals, Dhahran, Saudi Arabia
http://www.kfupm.edu.sa,
ahrahim@kfupm.edu.sa
2Transmission Asset
Planning Department, Saudi Electricity Company, Dammam,
Saudi Arabia.
http://www.se.com.sa,
mbabbas@se.com.sa
Abstract
Synchronous static compensator (STATCOM) can be used to improve the dynamic
performance of a power system. This article presents an
online adaptive pole-shift method for stabilization of a
single machine system which is then extended to a
multi-machine system. An adaptive linear plant parameter
model is used to derive the pole-shift control strategy. The
controller performance has been tested for various
disturbances. Responses for the single machine system were
also compared with optimized PI control and robustness of
the proposed adaptive algorithms was tested. From a number
of simulation studies on the single machine as well as the
multi-machine power system it was observed that the adaptive
algorithm converges very quickly and also provides robust
damping profiles to the under damped power system.
Keywords:
Power system
stabilizing control, STATCOM, on-line identification,
adaptive control, pole - shifting control
( Full Paper,
708 KB)
Biographies:
 |
Abu H. M. A. Rahim
did his Ph.D. from the University of Alberta,
Edmonton, Canada in 1972. Since his Ph.D., he has
worked at the University of Alberta, Bangladesh
University of Engineering, University of Strathclyde
(Glasgow), University of Bahrain, DeVry Institute of
Technology, Calgary and at the University of
CalgaryDr. Rahim is presently working at the King
Fahd University of Petroleum and Minerals, Dhahran
where he is a Professor. Dr. Rahim's main fields of
interest are power system stability, control and
application of artificial intelligence to power
systems. Dr. Rahim is a senior member of the IEEE
and Fellow of the Institute of Engineers,
Bangladesh.
|
 |
M. Baber Abbas
did his B.Tech in Electrical Engineering degree from
JNT University, Hyderabad, India in 2001 and M.S.
from the King Fahd University of Petroleum and
Minerals, Dhahran, Saudi Arabia in 2005. Mr. Abbas
is presently working as an Electrical Engineer in
Transmission Asset Planning Department, Saudi
Electricity Company, Dammam, Saudi Arabia. Mr.
Abbas’s main fields of interest are power system
analysis, FACTS devices & control, optimization. |
BibTex:
AUTHOR = {A.H.M.A.Rahim and M. Baber Abbas},TITLE = {Self Tuning Adptive Pole-Shift STATCOM Control for Single and Multi Machine Power Systems},
JOURNAL = {ICGST International
Journal on Automatic Control and Systems Engineering,
ACSE},
YEAR = {2007},
VOLUME = {07},
ISSUE = {II},
PAGES ={55--62}
}
(Full Paper,
708 KB)
|
